Automatic incubator Best-120 automatic mode of transition to alternative power supply (battery)
9200.00 ₴
Description
Description and Specifications:
New software control based on the ICS platform
An additional display shows the battery charge level
Fully automatic (turning and turning interval can be set from 1 to 4 hours), automatic humidity control with maintenance, automatic temperature control, automatic switch from 220V to 12V when power is lost, and vice versa from 12V to 220V, alarm system. Very quiet operation
Electronics manufactured in Germany.
Digital sensor, fan manufactured in Taiwan
Heating element: heating coil
Three-layer housing. Water-repellent wood-based panel on the inside, metal on the outside, and expanded polystyrene in the walls
The tray features a two-tier design with an extension.
The tray is universal for all types of eggs.
Operating time with a 55 Ah battery is 14–18 hours. This is important if you work during the day and cannot monitor the process constantly.
The unit weighs 12 kg. Maximum power consumption is 90–140 W, depending on the workload. Dimensions: 70 × 35 × 35 cm
The equipment combines an affordable price with a long-term quality guarantee.
An audible alarm will alert you to temperature deviations, as well as to the switch to battery power and when the battery is running low.
Optional equipment is installed at the customer's request. Livestock Farming
Battery charge level shown on the top display
Battery Warning System
Best incubators are equipped with an additional separate digital display that shows the battery’s charge level. A 12V adapter cord is included. The ICS-controlled incubator automatically switches to 12V when the 220V power supply is disconnected and back from 12V to 220V. The incubator can be plugged into the mains and connected to the battery at the same time. When the battery is running low, the incubator signals this by adjusting the contrast level of the main display and displaying information on the secondary display.
Advantages over similar incubators:
Compliance with fire safety regulations
Average power consumption: 30–50 W
Switching power supply. Handles not only voltage fluctuations but also frequency fluctuations with ease.
Forced shutdown and emergency power-off; an alarm system that alerts you to any deviations or failure of any component in the incubator; automatic switch to battery power.
No dampers. Humidity is generated by circulating cold and warm air, ensuring humidity accuracy with a margin of error of up to 1%.
Reversing system. Prevents failure of the motor responsible for turning the trays and provides protection against moisture.
The central control board for incubators is manufactured to a high standard in strict accordance with the entire production process. The control unit is manufactured in Germany. The display is backlit, allowing you to view information under any lighting conditions.